The Nomad Kitchen CV provides all the same features as the Original Nomad Kitchen in a low profile side-by-side layout. This layout is ideal as the base for an under bed platform, in military and teardrop trailers, and in subcompact SUVs, hatchbacks, and small crossovers.
Nomad Kitchen CV - Does It Fit?
The Nomad Kitchen CV will fit any vehicle or trailer with enough cargo space to fit a box 25 inches deep, 7.75 inches tall, and 33.25 inches wide (plus ratchet straps and red lock tabs) and 2-4 tiedown anchor points.
Vehicles with drop-down trunks: Measure from above the trunk sill as you will need to place the kitchen on a platform so the drawer can open. A platform made from 2x4s is typically the right height.
The following vehicles have been tested for fit:
Click on the image for more details. See below for more vehicles that should fit, but have yet to be photographed.
To clear trunk sill, place kitchen on 3.5 inch high platform (a rectangular platform made from 2x4s is the perfect height). The stock D-ring anchors that come in a Crosstrek have a low weight load rating. We recommend swapping them out for the bolt on D-rings available in our shop. No drilling required, just use the existing bolts that come in your Crosstrek.
Shown as the base for a bed platform
To clear trunk sill, attach the kitchen to the included 3/4 inch thick riser shim.
Able to attach to seat anchors with seats folded down. Recommend adding bolt-on anchors.
Standard mounting in older Prius. To secure the CV in a newer Prius that does not come with D-ring anchors at the sides, run both sets of mounting straps to the two child seat anchor points in the back of the rear seats.
To clear trunk sill, attach the kitchen to two 3/4 inch thick riser shims (one is included with every kitchen).
To clear trunk sill, place kitchen on 3.5 inch high platform (a rectangular platform made from 2x4s is the perfect height). This vehicle does not come with D-rings, but has D-ring bolt threads hidden under 4 plastic covers by the trunk sill and rear sides of the trunk. Grab a set of D-rings from our shop and a set of 4 M6 x 1 inch bolts, pop off the plastic mounts, and install the 4 D-rings and you are ready to mount your Nomad Kitchen.
Also fits the Original Nomad Kitchen
The Nomad Kitchen CV should fit the following vehicles in addition to any of the vehicle that found on the Original Nomad Kitchen does it fit page.
Vehicles marked in red have been tested and approved. Those in black should fit, but have yet to be tested. See the gallery above for example images.
Range Rover Velar
For larger vehicles check out the Original Nomad Kitchen.
If you own a vehicle that has yet to be tested, we welcome you to come to visit us in Oakland, CA to see how the Nomad Kitchen fits in your vehicle. You can book an appointment on our Contact page.
Vehicles with an * may require a platform to clear the trunk sill. Click on the image of the vehicle in the gallery above for details.